How to Put the Graco Snuggle Ride Together
- 1). Find the two left and right slots located in the bottom of the car seat cover. Insert the harness straps. There is one slot for each harness strap --- left and right.
- 2). Feed the buckle housing through the middle slot, located in the bottom cover. A buckle tongue should now be placed on each strap, and then both clipped into the housing.
- 3). Place harness clips on each strap, with male an female ends facing each other. Clip them together to test before proceeding.
- 4). Choose the correct slot for height adjustment, based on your child's height and insert the straps into the appropriate slot. Push them through the back of the seat.
- 5). Turn the seat over and pull the straps all the way through toward you. Place the ends of the straps through the opening behind the storage area for the owner's manual. Thread the looped ends into the plate on the base of the car seat.
- 6). Return the seat to an upright position and check the straps for a snug fit. Place the cover on the seat. It is now ready for use.
Source...