How Do I Troubleshoot a Breadman Ultimate?
- 1). Fill the entire bread pan with warm water and allow it to sit for 30 minutes if the kneading paddle is stuck. Sometimes the paddle becomes caked with flour and water, which harden at the base. After 30 minutes, pull up on the paddle and it should come free easily.
- 2). Allow the machine to continue running if you notice small mounts of smoke coming out of the top vents. This is due to ingredients being spilled on the heating element. After the cycle is complete, open the lid and wipe the heating element with a damp cloth.
- 3). Verify that the electrical cord is plugged in if the device will not turn on. If the plug is secure, open the top lid and check to see if the kneading paddle is installed in the bread pan. If the kneading paddle is missing, the machine will not function.
- 4). Reduce the amount of water and yeast that you use if the bread rises so much during cooking that it starts to lift the top of the machine. You will have to discard the current bread loaf since it cannot cook properly if the lid is open.
- 5). Look at the digital display if the unit is turned on but fails to begin mixing or baking. If the display is set to "Whole Wheat Rapid," "Whole Wheat" or "Jam," it must preheat before any activity begins.
- 6). Look at the digital display on top of the bread machine. If it displays an underscore or overscore followed by two squares, the device's electronic system must be professional repaired.
Source...