How to Change the Belt on a Maytag Intellidry Drum
- 1). Remove the lint filter from its compartment on the top dryer panel. Remove the two screws next to the lint compartment.
- 2). Insert the tip of the putty knife between the front panel and the top panel. Slide the knife along the gap to disengage the internal clips.
- 3). Lift the top panel up. Rest the panel on its rear hinges.
- 4). Unplug the wire connector leading to the door switch. Remove the two screws at the top of the front panel.
- 5). Lift the front panel off of the Maytag Intellidry dryer base. Set the panel aside.
- 6). Move the idler arm to the right to loosen the belt. Slide the belt off the drum and pulleys.
- 7). Position the new belt around the dryer drum. Hook the other end around the pulleys.
- 8). Reverse the disassembly process to put the Maytag dryer back together.
Source...